DiSEqC 1.1 Multi-Switch Gen

-20% DiSEqC 1.1 Multi-Switch Gen

DiSEqC 1.1 Multi-Switch Generator 39€


The DiSEqC 1.1 Multi-Switch Generator connects 2 satellite dishes LNBs to a multi-switch that enables your Sky HD or Sky+HD Digibox to get both ASTRA2D and Hotbird 13° E at the same time.


The DiSEqC 1.1 Multi-Switch Generator hooks up your Sky Digibox and a multi-switch to two satellite dishes.
An ideal accessory to get both ASTRA2D and Hotbird 13 ° E signals. Works with all Sky Digibox models.
The DiSEqC 1.1 Multi-Switch Generator puts out a command for uncommitted DiSEqC 1.1 relay.
DiSEqC 1.0 commands are looped.The generator is inserted in the LNC (low-noise converter) line.
The switchover gets triggered by either the 0/12 volt socket of the receiver (rear) or by the stand-by button
on the receiver (the Digibox must be in standby to prevent electric current reaching the LNBs).

See Specifications Tab

Specifications
Main Features

DiSEqC System Information


The DiSEqC system was developed by Eutelsat to enable satellite users in Continental Europe to switch between the more popular SES Astra satellites at 19.2° east and Eutelsat's own Hot Bird system at 13° east. Currently, the vast majority of European satellite receivers support DiSEqC 1.0 or higher. All supporting receivers have received certification to carry a logo specifying which variation of DiSEqC they support.


DiSEqC relies only upon a coaxial cable to transmit both bidirectional data/signals and power. DiSEqC is commonly used to control switches and motors, and is more flexible than 13/18 volt and 22 kHz tone or ToneBurst/MiniDiSEqC techniques. DiSEqC is also compatible with the actuators used to rotate large C band dishes if used with a DiSEqC positioner. DiSEqC uses a pulsed (tone-burst) 22 kHz sine-wave at 0.65 V (± 0.25 V)[2] peak to peak.

The "Di" (digital) part of the name refers to the digital nature of the signals used by the protocol and does not imply anything about the transmission that the dish is used to receive. DiSEqC may be used with both digital or analogue satellite systems.

Product Content

DiSEqC 1.1 Mult-Switch Generator

Set up Instruction guide

Technical

DiSEqC 1.1 Multi-Switch Generator Specifications:


Frequency range: 950 - 2400 MHz
Control: 0/12 V or manual switches
Low-noise converter Reduction: 2 dB max
Power consumption: 20 mA
Temperature Range: 30 ~ +70° C

For more information, visit the Eutelsat Technical Support website

Dimensions and Weight

Product Dimensions and Net Weight, plus Packaged Shipping Weight:


Dimensions: (L x W x H): 110 x 35 x 20 mm.
Net Weight: 800 gr.
Packaged Weight: (packing/carton weight including product: 1 kg).
Product Setup and Installation Manual(s)

DiSEqC 1.1 Multi-Switch Generator Einrichtung-Leitfaden


The DiSEqC 1.1 Multi-Switch Generator is inserted in the LNC (low-noise converter) line.
The switchover gets triggered by either the 0/12 volt socket of the receiver (rear) or by the stand-by button on the Digibox.
The Digibox must be in standby to prevent electric current reaching the LNBs.


Write a review

Please login or register to review

Genuine Products Guarantee: Sky Viewing Cards include our 24/7 viewing reception guarantee, contingent on normal use policy. Every Sky Digibox or other tangible product sold by UKTVSAT is a non-subsidised, brand new, original item and carries a 12 months manufacturer warranty (24 months in EU countries), a UKTVSAT 12 months Repair or Replace guarantee and 24/7 Reception guarantee. We don't sell copied, used or refurbished products.

Repair or Replace Guarantee: For customers inside Germany, in the event the box becomes faulty, we will collect, test, then if found to be faulty, replace the box with a brand new unit during the 12 month warranty period at no cost to you. For customers outside Germany, in the event the box becomes faulty, we will require that you send the box to us. We will test and then if found to be faulty, replace the box with a brand new unit during the 12 Month warranty period at no cost to you, including free return shipping (24 months in EU Trade Zone countries).


Replacement of defect items: After inspection and testing, irreparable defect items will be replaced with a new item and shipped to any European destination free of charge, including free shipping.



Collection and Return Policy: The collect and return at no cost only applies to faulty products located within Germany. If the product becomes faulty outside Germany, it will need to be returned to Germany for collection or shipped directly to us at your expense. We will then return the item to any European destination free of charge, including free return shipping (24 months in EU Trade Zone countries).

This Offer Expires In:
  • 49.00€
  • 39.00€

Shipping

Shipping cost includes free packaging and handling.
See Delivery & Returns Terms.
Sky Cards Flat Rate 3.50€ Registered Envelope worldwide.
International shipping via DHL, Deutsche Post, UPS, FedExt.
Europe 1 to 3 days. Some countries use intermediary courier services that can delay delivery a couple of days.
International 3 to 7 business days.
FedEx in case DHL or UPS can't deliver to the country or region specified in the order.

Tags: DiSEqC 1.1 Multi-Switch Gen